18V XR Li-Ion Bare Brushless 2 Speed Framing Nailer DCN692N by Dewalt Features:-
- 18V XR Li-Ion Two Speed Framing Nailer featuring BRUSHLESS motor technology
- Two speeds – or power levels – to optimise the nailer for firing all lengths of nails
- Benefit from longer runtime, quicker readiness to fire, less recoil and more durability when firing short nails
- BRUSHLESS motor technology offers the power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods
- The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
- Mechanical rather than gas operation offers consistant performance at temperature between -20 and 50 degrees celcius and minimal cleaning/service requirements
- Class leading vibration and sound figures, offer fantastic user protection
- Versatile 30 – 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
- Reversable belt/rafter hook povides increased portability and versatility on the job-site
- Depths can be easily adjusted using the thumb wheel depth adjuster
- Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
- Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
- Gas free operation offers a significant saving in running costs
- Tool free stall/jam clearance minimises user down time
- Cordless design allows you to work without the inconvenience and safety risk of trailing leads
- User can engage contact trip lock-off and prevent accidental dis-charge of fastener
- Dry fire lockout ensures that the tool is protected from firing without nails in the magazine
Specifications:-
| Nail Diameter | 2.8 – 3.3 mm |
| Battery Capacity | N/A Ah |
| Magazine angle | 30 – 34 ° |
| Nail Length | 50 – 90 mm |
| Magazine capacity | Up to 55 Nails |
| Magazine loading | Rear – load |
| Operating pressure range | NA Bar |
| Air consumption per shot @6.9 Bar | NA l |
| Firing mode | Bump & Sequential |
| Length | 345 mm |
| Width | 125 mm |
| Height | 338 mm |
| Weight | 4.1 kg |
| Voltage | 18 V |
| Nailer Operating Mode | Selective |
| Integrated Belt Hook | Yes |
| Jam Clearing | Yes |
| Impact energy (EPTA 05/2009) | 105 J |
| Temperature Range | -20 to 50 ºC |
| Fault indicator | Yes |
| Battery chemistry | XR Li-Ion |
| Magazine angle | |
| Trigger Type | |
| Noise LPa 1sd / Uncertainty | |
| Noise LWa 1sd / Uncertainty | |
| Noise LPa 1s, 1m / Uncertainty | |
| Vibration / Uncertainty |
